IBM x3690 X5 Service Manual page 237

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
IMM reset was caused by restoring
default values.
40000021-00000000 IMM clock has been set from NTP
server %1.(%1 =
IBM_NTPService.ElementName)
40000022-00000000 SSL data in the IMM configuration
data is invalid. Clearing configuration
data region and disabling SSL+H25.
Flash of %1 from %2 succeeded for
user %3.(%1 =
CIM_ManagedElement.ElementName;
%2 = Web or LegacyCLI; %3 = user
ID)
Severity Description
Info The IMM has been
reset because a user
has restored the
configuration to its
default settings.
Info The IMM clock has
been set to the date
and time that is
provided by the
Network Time
Protocol server.
Error There is a problem
with the certificate
that has been
imported into the
IMM. The imported
certificate must
contain a public
key that
corresponds to the
key pair that was
previously
generated through
the Generate a
New Key and
Certificate Signing
Request link.
Info A user has
successfully
updated one of the
following firmware
components:
v IMM main
application
v IMM boot ROM
v Server firmware
(UEFI)
v Diagnostics
v System power
backplane
v Remote
expansion
enclosure power
backplane
v Integrated service
processor
v Remote
expansion
enclosure
processor
Action
No action; information only.
No action; information only.
1. Make sure that the
certificate that you are
importing is correct.
2. Try to import the
certificate again.
No action; information only.
219
Chapter 3. Diagnostics