IBM x3690 X5 Service Manual page 232

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID Message
40000002-00000000 Certificate Authority %1 has detected
a %2 Certificate Error.(%1 =
IBM_CertificateAuthority.
CADistinguishedName; %2 =
CIM_PublicKeyCertificate.
ElementName)
Ethernet Data Rate modified from %1
to %2 by user %3.(%1 =
CIM_EthernetPort.Speed; %2 =
CIM_EthernetPort.Speed; %3 = user
ID)
Ethernet Duplex setting modified
from %1 to %2 by user %3.(%1 =
CIM_EthernetPort.FullDuplex; %2 =
CIM_EthernetPort.FullDuplex; %3 =
user ID)
Ethernet MTU setting modified from
%1 to %2 by user %3.(%1 =
CIM_EthernetPort.ActiveMaximum
TransmissionUnit; %2 =
CIM_EthernetPort.ActiveMaximum
TransmissionUnit; %3 = user ID)
Ethernet Duplex setting modified
from %1 to %2 by user %3.(%1 =
CIM_EthernetPort.NetworkAddresses;
%2 =
CIM_EthernetPort.NetworkAddresses;
%3 = user ID)
Ethernet interface %1 by user %2.(%1
= CIM_EthernetPort.EnabledState; %2
= user ID)
Hostname set to %1 by user %2.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 = user ID)
IP address of network interface
modified from %1 to %2 by user
%3.(%1 =
CIM_IPProtocolEndpoint.IPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.
IPAddress; %3 = user ID)
214
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Severity Description
Error A problem has
occurred with the
SSL Server, SSL
Client, or SSL
Trusted CA
certificate that has
been imported into
the IMM. The
imported certificate
must contain a
public key that
corresponds to the
key pair that was
previously
generated by the
Generate a New
Key and Certificate
Signing Request
link.
Info A user has
modified the
Ethernet port data
rate.
Info A user has
modified the
Ethernet port
duplex setting.
Info A user has
modified the
Ethernet port MTU
setting.
Info A user has
modified the
Ethernet port MAC
address setting.
Info A user has enabled
or disabled the
Ethernet interface.
Info A user has
modified the host
name of the IMM.
Info A user has
modified the IP
address of the
IMM.
Action
1. Make sure that the
certificate that you are
importing is correct.
2. Try importing the
certificate again.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.