IBM x3690 X5 Service Manual page 74

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine
which components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
Trained service technician.
Symptom
The mouse or pointing device
does not work.
56
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Action
1. See http://www.ibm.com/systems/info/x86servers/serverproven/compat/
us/ for information about mouse compatibility.
2. Make sure that:
v The mouse or pointing-device cable is securely connected to the server.
v If you are using a pointing device, the keyboard and mouse or
pointing-device cables are not reversed.
v The mouse or pointing-device device drivers are installed correctly.
v The server and the monitor are turned on.
v The mouse option is enabled in the Setup utility.
3. If you are using a USB mouse or pointing device and it is connected to a USB
hub, disconnect the mouse or pointing device from the hub and connect it
directly to the server.
4. Replace the following components one at a time, in the order shown, restarting
the server each time:
a. Mouse or pointing device
b. (Trained service technician only) System board