IBM x3690 X5 Service Manual page 197

Hide thumbs Also See for x3690 X5:
Table of Contents

Advertisement

Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID
Message
Sensor CPU n OverTemp has
transitioned to non-recoverable.(n =
microprocessor number)
80070301-2d01xxxx
Sensor IOH Temp Status has
transitioned to non-recoverable from a
less severe state.
80070608-1403xxxx
Sensor CPU_12_VIO has transsitioned
to non-recoverable
80070608-1403xxxx
Sensor CPU1 VRD has transitioned to
non-recoverable
Severity
Description
Error
A sensor has
changed to
Nonrecoverable
state.
Error
An internal system
element has
reached an
overtemperature
state.
Error
A VRD error is
detected.
Error
A VRD error is
detected.
Action
1. Make sure that the fans
are operating, that there
are no obstructions to
the airflow (front and
rear of the server), that
the air baffles are in
place and correctly
installed, and that the
server cover is installed
and completely closed.
2. Check the ambient
temperature. You must
be operating within the
specifications.
3. Make sure that the heat
sink for microprocessor
n is installed correctly.
4. (Trained service
technician only) Replace
microprocessor n.
(n = microprocessor
number)
1. Check for and correct
any system fan errors.
2. Make sure all server air
passages are clear of
debris or dust.
3. (Trained service
technician only) Replace
the system board.
(Trained service technician
only) Replace the system
board.
1. Update the following
firmware to the versions
indicated below:
v UEFI to version 1.75
or later
v FPGA to version 1.23
or later
v IMM to version 1.33
or later
v DSA to version 9.21
or later
2. (Trained service
technician only) Replace
the system board.
179
Chapter 3. Diagnostics

Advertisement

Table of Contents
loading

Table of Contents