Replacing The Sas Cable Guide - IBM x3690 X5 Service Manual

Hide thumbs Also See for x3690 X5:

Table of Contents

Replacing the SAS cable guide

To replace the SAS cable guide, complete the following steps:

1. Read the safety information that begins on page "Safety" on page vii and

2. Reinstall the SAS cable guide.

System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide

b. Grasp the cable guide and slide it toward the rear of the server to unhook

the tab on the rear of the cable guide from the system board.

c. Lift the SAS cable guide out of the server

"Installation guidelines" on page 261.

a. Hook the tab on the rear of the cable guide underneath the system board

(near the front of the power supply cage).

b. Secure the front of the cable guide to the system board using the screw that

was removed earlier.