IBM x3690 X5 Service Manual page 250

Table 11. IMM error messages detected when MAX5 is attached to the server (continued)
Event ID
806f010c-1881xxxx
232
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Message
Uncorrectable Error detected
for MEU DIMMs on
subsystem System Memory
Severity Description
Error MAX5 memory
expansion module
memory error
detected.
Action
1. Check IBM
support site for
an applicable
RETAIN tip or
firmware update
that applies to
this memory
error.
2. Swap the affected
DIMM with a
DIMM of the
same size and
type from a
different memory
channel.
3. Run the Setup
utility to enable
all the DIMMs.
4. If the DIMM still
fails on a
different memory
channel, replace
the DIMM.
5. If the swapped
DIMM fails on
the original
DIMM connector,
inspect the
DIMM connector
for debris or
damage. If the
connector is
damaged,
(trained
technician only)
replace the MAX5
system board
tray.