Replacing The Microprocessor Air Baffle - IBM x3690 X5 Service Manual

Microprocessor
air baffle
Tab
Attention: For proper cooling and airflow, replace the air baffle before you
turn on the server. Operating the server with the air baffle removed might
damage server components.

Replacing the microprocessor air baffle

To install the microprocessor air baffle, complete the following steps:
1. Read the safety information that begins on page "Safety" on page vii and
"Installation guidelines" on page 261.
2. Align the tabs on the air baffle with the slots on the power supply cage and the
chassis wall; then, slide the air baffle down until it is seated firmly with the
baffle tabs in the holes on the power supply cage and chassis wall.
Microprocessor
air baffle
Tab
Tab
Slots
Tab
Alignment sots
Chapter 5. Removing and replacing components
269