IBM x3690 X5 Service Manual page 401

Hide thumbs Also See for x3690 X5:

Table of Contents

5. Pull the system-board tray out until it stops; then, press the blue tabs on both

sides of the system-board tray and pull the tray out of the chassis.

6. Carefully open both retaining clips on each end of the DIMM connector and

remove the DIMM from the connector.

Attention: To avoid breaking the retaining clips or damaging the DIMM

connectors, open and close the clips gently.

7. If you are instructed to return the DIMM, follow all packaging instructions, and

use any packaging materials for shipping that are supplied to you.

Release latch

Chapter 5. Removing and replacing components

Release latch