IBM x3690 X5 Service Manual page 246

Table 11. IMM error messages detected when MAX5 is attached to the server (continued)
Event ID
806f070c-1881xxxx
228
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Message
Configuration Error for MEU
DIMMs on subsystem
"System Memory
Severity Description
Error MAX5 memory
expansion module
memory
configuration error
detected.
Action
1. Make sure that
the DIMM is
installed correctly
(see "Replacing a
memory module"
on page 296) for
more information.
2. If the DIMM was
disabled because
of a memory
error, follow the
suggested actions
for that error
event and restart
the server.
3. Check the IBM
support site for
an applicable
RETAIN tip or
firmware update
that applies to
this memory
error.
4. If no memory
error is recorded
in the event logs
and no DIMM
connector LED is
lit, re-enable the
DIMM through
the Setup utility
(see "Starting the
Setup utility" on
page 402) or the
Advanced
Settings Utility
(ASU).