Table of Contents
Advertisement
Figure 30. Installing the rail assembly to the rack frame
For example, Figure 31 on page 44 shows the front of the rail that is attached to the frame.
Figure 31. Example of the required rack space
7. Repeat steps "5" on page 43 through "6" on page 43 to install the opposite rail.
8. Install the expansion enclosure in the rack, as described in "Installing or replacing a 5U expansion
enclosure in a rack " on page 49.
Installing or replacing the fascia
During the initial installation process or after you perform service, you can install the fascia components
on the front of a 5U expansion enclosure.
About this task
The 4U fascia covers the display panel of the expansion enclosure. It is attached to the enclosure by four
screws. The bottom 1U fascia covers both of the power supply units (PSUs) on the enclosure. As Figure
32 on page 45 shows, the fascias are independent; you can remove or replace one without having to
remove or replace the other.
44 IBM Storwize V5000E : Storwize V5000E Quick Installation Guide
Advertisement
Table of Contents
