Table of Contents
Advertisement
Removing a microprocessor/memory card
To remove a microprocessor/memory card, complete the following steps.
Retention levers
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Remove the top cover (see "Removing the top cover" on page 41).
4. Slide the retention tabs to the open position and lift the retention levers on the
5. While you hold the retention levers open, lift the microprocessor/memory card
6. If necessary, remove all DIMMs (see "Removing a DIMM" on page 48).
7. If you are instructed to return the microprocessor/memory card, follow all
Replacing a microprocessor/memory card
The following notes describe information that you must consider when replacing a
microprocessor/memory card:
Tab
on page 37.
all external cables necessary to replace the device.
top of the microprocessor/memory card.
out of the server.
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
T
ab
Chapter 4. Removing and replacing server components
51
Advertisement
Table of Contents
