Table of Contents
Advertisement
5.
Store the disc in the cartridge.
(1) Rotate the CA transmission gear of the CA motor (V) assembly in the counterclockwise direction to move
the CA side slider R to the position shown in the illustration. (The disc is completely stored in the lower shell
by the return arm operation. Observe the lower shell of the cartridge from the front of this unit, and check
that the discs are returned to the blank slot in aligned state.)
ODS-D280U/ODS-D280F
CA transmission gear
CA motor (V) assembly
CA side slider R
Rear side
CA side slider R
1-22
Advertisement
Table of Contents
