Table of Contents
Advertisement
Code
Description
95-510
No data can be read from the
SPI-EEPROM (IC206:
BI-353 (ODS-D280U)/
BF-92 (ODS-D280F)
board).
95-511
An SPI-EEPROM (IC206:
BI-353 (ODS-D280U)/
BF-92 (ODS-D280F) board)
error was detected.
95-512
A BPI-FLASH (IC200:
BI-353 (ODS-D280U)/
BF-92 (ODS-D280F) board)
data error was detected.
95-513
No data can be written to the
BPI-FLASH (IC200: BI-353
(ODS-D280U)/BF-92
(ODS-D280F) board) during
firmware upgrade.
95-515
An ID error or version error
on the board was detected
during communication with
the RFID module board.
95-516
An error was detected during
communication with the
RFID module board.
95-517
A UID data comparison error
was detected in the cartridge
memory.
95-518
Existence of two or more car-
tridge memory devices was
detected during the cartridge
memory communication
processing.
95-519
The select loader adjustment
value cannot be read from the
SELECT-EEPROM (IC1:
SM-48 board).
95-51B
No data can be read from the
SELECT-EEPROM (IC1:
SM-48 board).
ODS-D280U/ODS-D280F
Error remedy method
1.
Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2.
Turn off and on the power.
1.
Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2.
Turn off and on the power.
1.
Turn off and on the power.
2.
Upgrade the firmware again.
If this error still remains, the BI-353 board
(ODS-D280U)/BF-92 board (ODS-D280F)
may be defective.
1.
Turn off and on the power.
2.
Upgrade the firmware again.
If this error still remains, the BI-353 board
(ODS-D280U)/BF-92 board (ODS-D280F)
may be defective.
1.
Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2.
Turn off and on the power.
•
If the same error occurs again, the
RFID module board may be defective.
1.
Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2.
Turn off and on the power.
•
If the same error occurs again, the
RFID module board may be defective.
1.
Eject a cartridge
2.
Insert again the ejected cartridge.
•
When an same error occurs, go to step
3) in Measures.
3.
Insert another cartridge.
•
In the case no error occurs:
The ejected cartridge is likely to be
faulty.
•
In the case the error occurs:
Drive trouble is likely.
1.
Eject a cartridge
2.
Insert again the ejected cartridge.
•
When an same error occurs, go to step
3) in Measures.
3.
Insert another cartridge.
•
In the case no error occurs:
The ejected cartridge is likely to be
faulty.
•
In the case the error occurs:
Drive trouble is likely.
1.
Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2.
Turn off and on the power.
1.
Acquire the drive/driver log.
If the same error occurs repeatedly, send the
acquired drive/driver log to your local Sony
Sales Office/Service Center.
2.
Turn off and on the power.
Refer to section
―
―
"4-19. BI-353/BF-92 Board"
"7. Firmware Upgrade"
"4-19. BI-353/BF-92 Board"
"7. Firmware Upgrade"
"10. Diagrams"
"10. Diagrams"
―
―
―
―
Continued
2-74
Advertisement
Table of Contents
