4.
Attach the carry loader assembly with the four screws (B2.6 x 4), two screws (M2.6 x 4) and two screws (M2 x
2.7).
M2 x 2.7
B2.6 x 4
(a)
Carry loader assembly
Tip
When attaching the carry loader assembly, tighten the screws in the order from (a) to (d).
5.
Connect the harness and cable in the reverse order of steps 1 and 2 of removal procedure.
6.
Reset all corresponding hours meters after replacing the parts. (Refer to
Middle Loader Assembly and Carry Loader
ODS-D280U/ODS-D280F
M2.6 x 4
(c)
(d)
Assembly".)
(c)
M2.6 x 4
(d)
M2 x 2.7
(b)
B2.6 x 4
"1-16-2. Select Loader Assembly, CA
4-31