Table of Contents
Advertisement
6.
Remove the six stepped screws, then remove the main base assembly.
Stepped screws
7.
Remove the two screws from the new main base assembly (RP), then remove the two protection sheets.
Note
The two screws and two protection sheets are not used in this unit because they are the protection parts.
Screw
8.
Install the removed parts by reversing the steps of removal.
Note
For service action after replacement, refer to
ODS-D280U/ODS-D280F
Protection sheet
"5. Adjustment of Optical Drive
Main base assembly
Protection sheet
Main base assembly (RP)
System".
Screw
4-73
Advertisement
Table of Contents
