# cat /proc/scsi/scsi
Attached devices:
Host: scsi9 Channel: 00 Id: 00 Lun: 00
Vendor: SONY
Type:
Optical Device
Measures
If indication cannot be checked in Check, perform the following procedure to check whether indication in the "Model"
field becomes normal.
1.
Check the USB cable connection status, and then check the check the indication in the "Model" field.
2.
Unplug and plug the USB cable, and then check the check the indication in the "Model" field.
3.
Turn off and on the unit, and then check the check the indication in the "Model" field.
4.
Connect the USB cable to another USB port, and then check the check the indication in the "Model" field.
5.
Restart the PC, and then check the check the indication in the "Model" field.
6.
Replace the USB cable, and then check the check the indication in the "Model" field.
ODS-D280U/ODS-D280F
Model: ODS-D280U
Check:
ODS-D280U
Rev: 1300
ANSI
SCSI revision: 00
1-6