Table of Contents
Advertisement
Procedure
1.
Remove the eight screws, then remove the DR-683 sub assembly (RP).
Note
• Do not separate the DR-683 board and the radiation plate.
• In the DR-683 main assembly (RP), the DR-683 board, DR radiation plate and board supports are fixed to
the DR board bracket with the eight screws. In this unit, the eight screws, DR board bracket and board supports
are not used.
DR-683 sub assembly (RP)
DR-683 board and
radiation plate integrated
block
Board support
2.
Attach the DR-683 sub assembly (RP) with the eight screws.
3.
Assemble this unit.
Tip
As for the attaching of the BU thread guard 2 and JS BU harness retaining sheet, refer to
ODS-D280U/ODS-D280F
Screws
Board
support
Screws
DR board bracket
Board
support
Board
support
"4-29. Sub Base
Assembly".
4-77
Advertisement
Table of Contents
