Table of Contents
Advertisement
Procedure
1.
Remove the eight screws, then remove the DR-683 main assembly (RP).
Note
• Do not separate the DR-683 board and the radiation plate.
• In the DR-683 main assembly (RP), the DR-683 board, DR radiation plate and board supports are fixed to
the DR board bracket with the eight screws. In this unit, the eight screws, DR board bracket and board supports
are not used.
DR-683 main assembly (RP)
DR-683 board and
radiation plate integrated
block
Board support
Tip
As for the attaching of the BU thread guard 2, JS BVA heat transfer sheet and JS SPDL DRV heat transfer sheet,
refer to
"4-30. Main Base
2.
Attach the DR-683 main assembly (RP) with the eight screws.
3.
Assemble this unit.
ODS-D280U/ODS-D280F
Screws
Assembly".
Screws
Board
support
Board
support
DR board bracket
Board
support
4-79
Advertisement
Table of Contents
