Table of Contents
Advertisement
5.
Repeat step 3, and push the cleaner pusher (280) to the two portions of the lens cleaning base (280).
Note
This is an important procedure to determine the distance between the lens and lens cleaner. Be sure to perform this
procedure securely.
Positioning dowel
Positioning hole
Lens cleaners
Cleaner pusher (280)
6.
Remove the cleaner pusher (280), and check that the lens cleaners are attached to the lens cleaning base (280)
assembly and lens cleaning base (280) as shown in the illustration. If the lens cleaners are not attached to the correct
position, perform steps 3 to 5 again.
Before attaching cleaners
ODS-D280U/ODS-D280F
Cleaner pusher (280)
Positioning dowel
Lens cleaning base (280) assembly
or lens cleaning base (280)
Positioning hole
Lens cleaning base (280) assembly
or lens cleaning base (280)
After attaching cleaners
3-15
Advertisement
Table of Contents
