Table of Contents
Advertisement
Code
Description
54-006
An unsupported data format
was detected in the cartridge
memory read data.
54-007
An unsupported data format
was detected when data was
written to the cartridge mem-
ory. (Including data CRC er-
ror)
54-008
A comparison error between
the disc BCA code in the car-
tridge memory and the actual
media BCA code was detec-
ted.
54-009
A comparison error between
the media type in the car-
tridge memory and the actual
media type was detected.
54-200
A TDMA area error was de-
tected during write-back to
the recording disc or format-
ting.
54-201
A disc error was detected
during finalizing of the re-
cording disc.
ODS-D280U/ODS-D280F
Error remedy method
Eject a cartridge.
•
This cartridge may be incorrect.
This is a disabled cartridge.
Eject a cartridge.
•
This cartridge may be incorrect.
This is a disabled cartridge.
1.
Eject a cartridge.
2.
Insert again the ejected cartridge.
•
When no error occurs, use the unit as
it is.
•
When an error occurs, go to step 3) in
Measures.
3.
Insert another cartridge.
•
In the case no error occurs:
The ejected cartridge is likely to be
faulty.
Disc in the cartridge may be replaced.
•
In the case the error occurs:
Drive trouble is likely.
1.
Eject a cartridge.
2.
Insert again the ejected cartridge.
•
When no error occurs, use the unit as
it is.
•
When an error occurs, go to step 3) in
Measures.
3.
Insert another cartridge.
•
In the case no error occurs:
The ejected cartridge is likely to be
faulty.
•
In the case the error occurs:
Drive trouble is likely.
1.
Eject a cartridge.
2.
Insert again the ejected cartridge. Perform
recording files/formatting.
•
When no error occurs, use the unit as
it is.
•
When an error occurs, go to step 3) in
Measures.
3.
Insert another cartridge. Perform recording
files/formatting.
•
In the case no error occurs:
The ejected cartridge is likely to be
faulty.
•
In the case the error occurs:
Drive trouble is likely.
1.
Eject a cartridge.
2.
Insert again the ejected cartridge. Perform
finalize.
•
When no error occurs, use the unit as
it is.
•
When an error occurs, go to step 3) in
Measures.
3.
Insert another cartridge. Perform finalize.
•
In the case no error occurs:
The ejected cartridge is likely to be
faulty.
•
In the case the error occurs:
Drive trouble is likely.
Refer to section
―
―
―
―
―
―
Continued
2-60
Advertisement
Table of Contents
