Table of Contents
Advertisement
3.
Remove the three screws, then remove the BF-92 booard.
Tip
The following parts are not available as service parts. If damaged or contaminated, replace them. If required, contact
your local Sony Sales Office/Service Center.
• JS KINTEX shell
• JS radiation sheet KINTEX2
BF-92 board
4.
Install the removed parts by reversing the steps of removal.
Note
For service action after replacement, refer to
ODS-D280U/ODS-D280F
PSW2 x 5
JS radiation
sheet KINTEX2
"1-16-3. BI-353 Board (ODS-D280U)/BF-92 Board
JS radiation sheet KINTEX3
JS KINTEX shell
JS radiation sheet PCIE
Rear side
Upper side
(ODS-D280F)".
JS radiation sheet
KINTEX
4-51
Advertisement
Table of Contents
