Table of Contents
Advertisement
3.
Install the removed parts by reversing the steps of removal.
Note
• When attaching the CA lower BU assembly, pass each harness through the hole of the CA lower plate.
• When attaching the CA lower BU assembly, check that the flexible flat cable is connected.
• Attach the bearing located at each center on both sides of the lower BU assembly by inserting it into the
groove of the CA lower plate.
• The CA lower BU assembly for replacement does not include the flexible flat cable. Use the flexible flat cable
before replacement as it is.
Hook
Bearing
Helical extension
spring
Helical extension
spring
CA lower plate assembly
ODS-D280U/ODS-D280F
Hook
CA lower BU assembly
Hook
Groove
Bearing
Hook
Harness
Fine-wire
coaxial
cable
Groove
A
Helical extension springs
Flexible flat cable
View on arrow A
Harness
CA lower plate assembly
n
Be careful not to pass the
harness through the wrong hole.
4-44
Advertisement
Table of Contents
