3.
Remove the spindle motor.
(1) Remove the screw (M1.7 x 3).
(2) Remove the three screws (PSW2 x 6), then remove the spindle motor.
Note
When removing the spindle motor, hold the portions A.
4.
Install the removed parts by reversing the steps of removal.
ODS-D280U/ODS-D280F
M1.7 x 3
(0.1 ±0.02 N·m)
PSW2 x 6
(0.2 ±0.02 N·m)
Spindle motor
A
A
Tray
4-63