4.
Install the removed parts by reversing the steps of removal.
Tip
• Before attaching the CA middle arm plate assembly, slide the portion (g) so that each portion is aligned as
shown in the illustration.
• Be careful that the portions (j) and (k) of the CA middle arm plate assembly do not ride on the arm plate.
Portion
(g)
Arm plate (L)
Tip
When attaching the CA middle arm plate assembly, check that the guide shafts are put in the grooves of the CA
middle base assembly.
View on arrow A
ODS-D280U/ODS-D280F
Portion
(g)
CA middle base assembly
A
B
View on arrow B
Grooves
Portion
(j)
Arm plate (R)
CA middle arm plate assembly
Guide shaft
CA middle base assembly
Guide shaft
Portion
(k)
(view from rear)
4-47