Table of Contents
Advertisement
2.
Attach the lens cleaners to the lens cleaning base (280) assembly and lens cleaning base (280).
Note
• Be sure to use the tweezers to prevent the lens cleaner from being contaminated.
• Hold the shaft of lens cleaner with the tweezers, and attach it to the lens cleaning base (280) assembly and
lens cleaning base (280).
• After taking the lens cleaner out of the bag, attach it to the lens cleaning base (280) assembly and lens cleaning
base (280) without placing it on the table.
• Attach the lens cleaner to the surface side that has engraved letters.
• Attach the eight lens cleaners to each lens cleaning base (sixteen portions in total).
Lens cleaners
Lens cleaning base (280) assembly
3.
Place the cleaner pusher aligning the positioning dowels of the cleaner pusher (280) with the positioning holes of
the lens cleaning base (280) assembly.
Then, push the cleaner pusher (280) so that there is no clearance between the lens cleaning base (280) assembly
and the cleaner pusher (280).
4.
Repeat step 3, and push the cleaner pusher (280) to the other portion of the lens cleaning base (280) assembly.
ODS-D280U/ODS-D280F
Lens cleaners
Engraved letters
Lens cleaners
Shaft of lens cleaner
Lens cleaners
Lens cleaning base (280)
Tweezers
3-14
Advertisement
Table of Contents
