Other Operations - YASKAWA MP210 Series User Manual

4 System Startup and Sample Programs

4.3.3 Other Operations

4.3.3 Other Operations
This section explains the CPU RUN setting and log-off operation required when MPE720 Ver 5. is used.
(1) CPU RUN Settings
If the CPU STOP status is not cleared after executing processes such as saving to flash memory, use the follow-
ing procedure to return to RUN status.
1. Right-click on the Controller Folder where sample programs are saved and select Controller Operation
from the pop-up menu.
The Running status dialog box appears.
2. Click the Run button.
Note: To stop the CPU, for example to verify errors, click the STOP button displayed here.
The change confirmation dialog box is displayed.
3. Click the Yes button to return to the Running status dialog box. Check that the S2 LED indicator of the
MP2100 is lit in green.
4. Click the CLOSE button in the Running status dialog box to exit RUN settings.
4-46