Operations Using Memosoft; Memosoft Versions Supporting 64-Point I/O Modules - YASKAWA MEMOCON GL120 User Manual

3 Digital I/O Specifications

3.5.1 MEMOSOFT Versions Supporting 64-point I/O Modules

3.5

Operations Using MEMOSOFT

3.5.1
CAUTION
This section describes the I/O allocations (maps) using the MEMOSOFT.

3.5.1 MEMOSOFT Versions Supporting 64-point I/O Modules - - - - - - - - 3-106

3.5.2 Digital Input Module I/O Allocation Screen - - - - - - - - - - - - - - - - - - 3-107
3.5.3 Digital Output Module I/O Allocation Screen - - - - - - - - - - - - - - - - 3-108
3.5.4 I/O Allocations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-109
MEMOSOFT Versions Supporting 64-point I/O Modules
The following MEMOSOFT versions are required to use 64-point I/O Modules in
MEMOCON GL120 or GL130.
The following CPU Module, Remote I/O Receiver Module, and MEMOSOFT versions
are necessary to use 64-point I/O Modules.
Using an inappropriate version may cause failure and malfunction.
Table 3.10 Versions Supporting 64-point I/O Modules
Name Model
Name
CPU Module CPU10
(8 kW)
CPU Module CPU20
(16 kW)
CPU Module CPU21
(16 kW)
CPU Module CPU30
(32 kW)
CPU Module CPU35
(40 kW)
Remote I/O RIOR-
Receiver COAX
Module
MEMOSOFT
* The nameplate is on the right side of the Module.
Model No. Version Number
DDSCR- A01 and later
120CPU14200
DDSCR- B05 and later
120CPU34100
DDSCR- A01 and later
120CPU34110
DDSCR- B05 and later
120CPU54100
DDSCR- A01 and later
120CPU154110
JAMSC- A10 and later
120CRR13100
FMSGL-AT3 1.21
(for English
DOS)
FMSGL-PP3E
(for P120
English version)
3-106
Location of
Version Number
Module nameplate
Module nameplate
Module nameplate
Module nameplate
Module nameplate
Module nameplate
and later In the middle at the
bottom of the
MEMOSOFT star-
tup screen.