Setting The Mp2100M Slave Cpu Synchronization Function - YASKAWA MP210 Series User Manual

F.2.3 Setting the MP2100M Slave CPU Synchronization Function
The settings for using the slave CPU synchronization function are shown below.
(1) Setting at the Master Device
There is no setting for enabling/disabling the slave CPU synchronization function at the master device.
On the MECHATROLINK Link Assignment tab page, set High for the synchronous scan setting of the Built-in
SVB Module of MP2100M.
Select SVB-01 when allocating
an MP2300S/SVB too.
F.2 Execution Conditions and Settings
Set the synchronous scan
setting to "High".
F
F-5