5.1 Overview
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•
Create a VLAN
•
Set Port VID
•
Configure Switch Management IP Address
5.1.1 Create a VLAN
VLANs confine broadcast frames to the VLAN group in which the ports belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 71 Initial Setup Network Example: VLAN
Go to the SWITCHING > VLAN > VLAN Setup > Static VLAN screen. Click Add/Edit.
1
Chapter 5 Initial Setup Example
Initial Setup Example
XGS2220 Series User's Guide
100
C
H A P T E R
5