Figure 63 Wizard > QoS > QoS Setting
Each field is described in the following table.
Table 28 Wizard > QoS > QoS Setting
LABEL
QoS Setting
Select all ports
High
Medium
Low
Finish
Cancel
4.6 Web Configurator Layout
The DASHBOARD screen is the first screen that displays when you access the Web Configurator.
Chapter 4 Web Configurator
DESCRIPTION
Select all ports to apply settings on all ports.
You can select a port by clicking it.
Select ports and click the High button, so they will have high priority.
The port's IEEE 802.1p priority level will be set to 5. Use the Basic Setting > Port Setup screen to
adjust the value.
Select ports and click the Medium button and, so they will have medium priority.
The port's IEEE 802.1p priority level will be set to 3. Use the Basic Setting > Port Setup screen to
adjust the value.
Select ports and click the Low button, so they will have low priority.
The port's IEEE 802.1p priority level will be set to 1. Use the Basic Setting > Port Setup screen to
adjust the value.
Review the information and click Finish to create the task.
Click Cancel to exit this screen without saving.
XGS2220 Series User's Guide
86