Configure Snmp User; Add/Edit Snmp User - ZyXEL Communications XMG1915 Series User Manual

Table 70 SYSTEM > SNMP (continued)
LABEL
Port
Username
Apply
Cancel

26.3 Configure SNMP User

Use this screen to create SNMP users for authentication with managers using SNMP v3 and associate
them to SNMP groups. An SNMP user is an SNMP manager. Click SYSTEM > SNMP > SNMP User to view the
screen as shown.
Figure 112 SYSTEM > SNMP > SNMP User
The following table describes the labels in this screen.
Table 71 SYSTEM > SNMP > SNMP User
LABEL
Index
Username
Security Level
Authentication
Privacy
Group
Add/Edit
Delete

26.3.1 Add/Edit SNMP User

Use this screen to create SNMP users for authentication with managers using SNMP v3 and associate
them to SNMP groups. An SNMP user is an SNMP manager. Click Add/Edit, or select an entry and click
Add/Edit in the SYSTEM > SNMP > SNMP User screen to view the screen.
Chapter 26 SNMP
DESCRIPTION
Enter the port number upon which the manager listens for SNMP traps.
Enter the user name to be sent to the SNMP manager along with the SNMP v3 trap.
This user name must match an existing account on the Switch (configured in the SYSTEM >
SNMP > SNMP User screen).
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is a read-only number identifying a login account on the Switch.
This field displays the user name of a login account on the Switch.
This field displays whether you want to implement authentication and/or encryption for SNMP
communication with this user.
This field displays the authentication algorithm used for SNMP communication with this user.
This field displays the encryption method used for SNMP communication with this user.
This field displays the SNMP group to which this user belongs.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XMG1915 Series User's Guide
159