General Setup - ZyXEL Communications GS1915 Series User Manual

Figure 62 Basic Setting > System Info
The following table describes the labels in this screen.
Table 25 Basic Setting > System Info
LABEL
System Name
Product Model
ZyNOS F/W
Version
Ethernet
Address
CPU Utilization
Memory
Utilization
Name
Total (byte)
Used (byte)
Utilization
(%)

8.3 General Setup

Use this screen to configure general settings such as the system name and time. Click Basic Setting >
General Setup in the navigation panel to display the screen as shown.
Chapter 8 Basic Setting
DESCRIPTION
This field displays the descriptive name of the Switch for identification purposes.
This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
This field displays the version number of the Switch 's current firmware including the date created.
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
CPU utilization quantifies how busy the system is. Current (%) displays the current percentage of
CPU utilization.
Memory utilization shows how much DRAM memory is available and in use. It also displays the
current percentage of memory utilization.
This field displays the name of the memory pool.
This field displays the total number of bytes in this memory pool.
This field displays the number of bytes being used in this memory pool.
This field displays the percentage (%) of memory being used in this memory pool.
GS1915 Series User's Guide
86