3.2 Mounting the RGS Series (Wall mount)
The Switch can be mounted on a wall. You may need screw anchors if mounting on a concrete or brick
wall.
2.3.1 Installation Requirements
•
Distance above the floor: At least 1.8 m (5.9 feet)
•
Distance between holes: 151 mm (5.945 inches) for RGS100-5P
•
Two M4 screws and a #2 Philips screwdriver
•
Two screw anchors (optional)
Mounting step:
1. Screw on the wall-mounting plate on with the plate and screws in the accessory kit.
172 mm (6.772 inches) for RGS200-12P
15