Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 200 SWITCHING > VLAN > VLAN Status > VLAN Status Details
LABEL
VID
Elapsed Time
Status
Port Number
56.4 Configure a Static VLAN
Use this screen to view and configure a static VLAN for the Switch. Click SWITCHING > VLAN > VLAN
Setup > Static VLAN to display the screen as shown next.
Figure 270 SWITCHING > VLAN > VLAN Setup > Static VLAN
The following table describes the related labels in this screen.
Table 201 SWITCHING > VLAN > VLAN Setup > Static VLAN
LABEL
VID
Active
Name
Add/Edit
Delete
56.4.1 Add/Edit a Static VLAN
Use this screen to configure a static VLAN for the Switch. Click Add/Edit, or select an entry and click
Add/Edit in the SWITCHING > VLAN > VLAN Setup > Static VLAN screen to display this screen.
Chapter 56 VLAN
DESCRIPTION
This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
This field shows how this VLAN was added to the Switch.
•
Dynamic: using GVRP
•
Static: added as a permanent entry
This section displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as "–".
DESCRIPTION
This field displays the ID number of the VLAN group.
This field indicates whether the VLAN settings are enabled or disabled.
This field displays the descriptive name for this VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new static VLAN or edit a selected one.
Click Delete to remove the selected static VLAN.
XMG1930 Series User's Guide
386
Advertisement
Table of Contents
Troubleshooting
