Vlan Status - ZyXEL Communications XS3800-28 User Manual

9.2.0.3 Se le c t the VL AN T ype
Select a VLAN type in the
is not applicable in stacking mode.
VL AN T ype
Basic Setting > Switch Setup > Select VLAN Type
Fig ure 98
802.1Q Sta tic VL AN
Make sure
802.1Q
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
9.3 VL AN Sta tus
Use this screen to view and search all static VLAN groups. Click
navigation panel to display the
Chapter 9 VLAN
>
Ba sic Se tting Switc h Se tup
is selected in the
Ba sic Se tting
VL AN Sta tus
XS3800-28 User's Guide
screen.
> screen.
Switc h Se tup
Adva nc e d Applic a tio n
screen as shown next.
134
> from the
VL AN