Interference With Flexible Feature Codes - Nortel Meridian 1 Planning And Installation Manual

Page 560 of 590

Interference with Flexible Feature Codes

553-3021-209 Standard 1.00
Appendix E – Changing preprogrammed data
If the preprogrammed Flexible Feature Codes interfere with the programming
required for the Option 11C Mini system, use LD 57 to remove the data from
the system.
LD 57
To change one or more access codes, enter the following commands:
REQ CHG, END
TYPE FFC
CUST 0-31
FFCT YES,(NO)
CODE aaaa
AAAA xx
CODE <CR>
REQ END
To remove one access code, enter the following commands:
REQ OUT
TYPE FFC
CUST 0-31
FFCT YES,(NO)
ALL NO
CODE aaaa
AAAA xx
CODE <CR>
REQ END
July 1999
Change or end
FFC = Flexible feature codes
Customer Number
FFC Confirmation tone
Enter access code prompt (aaaa)
Enter the new access code prompt
(AAAA)
Return to REQ
End program
Action request
FFC = Flexible feature codes
Customer Number
FFC Confirmation tone
Remove specific access code
Enter access code prompt (aaaa)
Enter the new access code prompt
(AAAA)
Return to REQ
End program