Activating A Default Model Trunk - Nortel Meridian 1 Planning And Installation Manual

Activating a default model trunk

Due to the automatic 30 second time-out on the administration menu, prepare
the data that you want to input before you begin. To determine the
corresponding TNs and trunks, check the location of trunk cards in the chassis
or use LD 32.
"Appendix A – General information for the United Kingdom" on
page 347 lists the default trunk models and trunk routes used in the
UK.
INSTRUCTIONS FOR GERMANY
"Appendix B – Additional information for installations in Germany"
on page 411 contains instructions for activating trunks in Germany.
Procedure 74
Activating a default model trunk
1 Lift the handset of the administration telephone.
2 Enter the administration Flexible Feature Code to access the
administration menu.
The prompt "PASSWORD?" appears.
3 Enter the default administration telephone password.
You hear special dial tone and the prompt
"TASK?" appears in the top line of the character display.
The second line of the display reads"1 ADD TRUNK".
4 Select "1 ADD TRUNK" by entering the number "1".
The prompt "ROUTE ACCESS?" appears on the character display.
Chapter 18 — Connecting the trunks
INSTRUCTIONS FOR THE UK
Option 11C Mini
Page 337 of 590
Planning and Installation Guide