Nt5K21 Xmfc Card - Nortel Meridian 1 Planning And Installation Manual

Page 142 of 590

NT5K21 XMFC card

553-3021-209 Standard 1.00
Chapter 12 — Installing the circuit cards
The NTDK97 MSC card provides the functionality of the Extended
Multi-frequency Compelled Sender/Receiver (XMFC) card. However, this
card can still be used if you wish to access additional XMFC capability.
The XMFC card provides four channels of R2 Standard signaling capability.
Procedure 17
XMFC card installation
1 Insert the NT5K21 card in its assigned slot.
You can install this card in slots 1 through 3 in the Main Chassis or
slots 7 through 10 in the Chassis Expander.
Note: After the card is enabled, the LED flashes three times to indicate
it is conducting a self-test. If the LED remains lit, the self-test has failed.
—————————— End of Procedure ——————————
July 1999