Turning Services On And Off Using Feature Codes; Viewing The Active Services From A Two-Line Display Telephone - Nortel Enterprise Edge Feature Programming Telephone Manual

Turning Services on and off using feature codes

The master control for services is in programming. See
on page 117. Day-to-day use of Services is controlled using the following feature
codes.
ƒ°‡⁄
ƒ£°‡⁄
ƒ°‡¤
ƒ£°‡¤
ƒ°‡‹
ƒ£°‡‹
To turn a Service on:
1. Enter the appropriate feature code from a control telephone.
2. Press to move through the schedules until the display shows the version
NEXT
of the service you want to be turned on.
3. Press to select the setting, or press
OK
any changes.
To turn a Service off:
1. Enter the appropriate feature code from a control telephone.

Viewing the active Services from a two-line display telephone

When a Service is active, the control telephone display reads
1. Press . The display shows the first active Service and the schedule that is
LIST
in use.
2. If there are several active Services, press
3. Press to exit the feature.
EXIT
P0908510 Issue 01
Turns on Ringing service. When used at the
direct-dial telephone, it activates the alternate
direct-dial telephone (extra-dial telephone).
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
Do not confuse activating Normal service with canceling a Service.
Setting a Service to Normal is not the same as canceling a Service using a
feature code. If you set the Service to Normal, the normal version of a
Service overrides any automatic schedule and remains in effect until you
manually cancel it. If you cancel the Service, you return to the automatic
schedule.
Enterprise Edge Feature Programming Telephone Guide
Using System features 119
Turning Services on and off
to exit the feature without making
QUIT
Services ON
to see them all.
NEXT
.