Ac Power Installation For Systems Installed On A Wall Or Table; Ac Power Installation For Systems Installed In A Rack/Cabinet - Nortel Meridian 1 Planning And Installation Manual

The optimal installation of an AC-powered Option 11C Mini system includes
a direct connection to the electrical system in the building, provided certain
requirements are met. Refer to AC-powered installation later in this chapter
for detailed information.
You can use an approved isolation transformer for AC-powered systems
when meeting the optimum requirements is not possible or is too expensive.
See "Alternative AC-powered installation" on page 40.

AC power installation for systems installed on a wall or table

Use a dedicated AC service panel with the Option 11C Mini system. Do not
connect equipment unrelated to the Option 11C Mini to this panel. Keep all
lighting, fans, motors, air conditioning equipment, and the like, as
"electrically separate" from the Option 11C Mini system as possible.

AC power installation for systems installed in a rack/cabinet

If other data communications equipment is in the same rack/cabinet as the
Option 11C Mini, it is recommended that each piece of equipment be
powered from an isolated ground outlet. All outlets must be serviced from the
same service panel.
Chapter 3 — System and site requirements
Option 11C Mini
Page 37 of 590
Planning and Installation Guide