Nortel Meridian 1 Planning And Installation Manual page 444

Appendix B – Additional information for installations in Germany
3 Enter the default password "6891".
You hear special dial tone and the prompt
"EINGABE?"
appears in the top line of the character display.
The second line of the display reads "1 LEITUNG ANMELDEN".
4 Select "1 LEITUNG ANMELDEN" by entering the number "1".
The prompt "BÜNDEL-KENNZAHL" appears on the character display.
5 Enter the access code of the route to which you want to add a trunk
and press the pound key (#).
The prompt
"TERMINAL-NR?"
asks you to enter a TN (Terminal Number) from one of the installed trunk
cards.
If you do not enter a valid route number, "TERMINAL-NR?" does not
appear and the screen remains the same. If the type of trunk card does not
match the route, the prompt "BÜNDEL KENNZAHL" appears again,
and you hear overflow tone.
6 Enter the TN in Option 11 format (CCUU - Card, Unit) and press the
pound key.
The prompt
"TELEFON-TYP(X)"
appears. If you enter an invalid TN, the display shows "NICHT
ERLAUBT, TERM.-NR?" and you must enter a new TN using the
Option 11 format.
7 Press the digits to select a trunk model (as assigned in LD 16).
The character display shows
"OK".
After a delay of approximately 4 seconds you hear special dial tone.
The sequence is repeated when the prompt
"TERMINAL-NR?"
appears on the character display.
The next valid trunk TN is automatically incremented after each trunk is
activated.
Option 11C Mini Planning and Installation Guide
Page 423 of 590