Nortel Meridian 1 Planning And Installation Manual page 94

Page 74 of 590 Chapter 6 — Getting started installing the Option 11C Mini
Figure 14
Faceplate on the Option 11C Mini chassis
553-3021-209 Standard 1.00
11 Install the Mini System Controller (MSC) card in CPU slot 00 of the
Main Chassis. See "NTDK97 Mini System Controller (MSC) card" on
page 129.
12 Install the 48-port Digital Line Card in Slot 04 of the Main Chassis. Refer
to "NTDK16 48-port Digital Line Card" on page 133.
13 Install the other circuit cards that you wish to have in your Option 11C
Mini system. Refer to your card slot assignment plan and "Chapter 12 —
Installing the circuit cards" on page 125.
14 Install the cross-connect terminal. "Chapter 13 — Installing and
connecting the cross-connect terminal" on page 229.
15 Install the cables from the chassis to the cross-connect terminal. See
"Chapter 13 — Installing and connecting the cross-connect terminal" on
page 229.
July 1999
Loosen the
quick-release
screws