Nortel Meridian Meridian 1 Release Note

Incorrect on/off labels for s1 and s2 switches

Hide thumbs Also See for Meridian Meridian 1:

Download this manual See also: Maintenance Manual, Operating Manual

Documentation Release Note

Incorrect on/off labels for S1 and S2 switches

Customer Service Report Number

NTP Number

Software Release

Description

Nortel Networks

In Fiber Remote Multi-IPE Interface: Description, Installation, and

Maintenance (553-3001-022), the labels indicating the on/off positions for

the S1 and S2 switches are incorrect in Table 8, Figure 7, and Table 11.

• Figure, table, procedure, and page numbers shown below are subject

to change in the next standard release of documentation.

• Text shown below in strikethrough has been replaced or removed.

24 September 2003

Q00628634

553-3001-022

Meridian1 Release 25.0x

IMPORTANT!

Number: MER-0903-017

1 of 4

Page 1 S1 and S2 switches are incorrect in Table 8, Figure 7, and Table 11. • Figure, table, procedure, and page numbers shown below are subject • Text shown below in strikethrough has been replaced or removed. Nortel Networks Q00628634 553-3001-022 Meridian1 Release 25.0x...
Page 2 Physical location of the Fiber Remote Multi-IPE Interface Reserved for future use Note: Switch position: ON= Down Up and OFF= Up Down for S1 and S2 switches. Nortel Networks Switch and Position S1 Position 1 and Position 2 S1 Position 1...
Page 3 Figure 7 Installing the redundant fiber-optic link option Remove covers from fiber connectors Insert connctors in faceplate holes Standoff Nortel Networks Daughterboard Ribbon cable Connector 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8...
Page 4 Projected Inclusion in NTP This correction will be included in the next standard release of Meridian 1 and Succession documentation. * Nortel Networks, the Nortel Networks logo, the Globe mark, SL-1, Meridian 1, and Succession are trademarks of Nortel Networks. Nortel Networks...

S1S2