Nortel Meridian 1 Planning And Installation Manual page 418

Appendix A – General information for the United Kingdom
Option 11C Mini to 81, All Mercury ChAS Trunks
Prompt
ONP
DSET
OPX
DTT
SDTT
DCO
DTO
NTC
TRC
DTR
VNL
SATT
ACO
ATO
PRI
PRI2
XUT
XEM
Response Description
4 0 On premises extension initial values
4 0 Meridian digital set initial values
4 0 Off premises extension initial values
4 0 Digital TIE trunks initial values
4 0 Satellite Digital TIE trunks initial values
4 0 Digital COT, FEX, WAT and DID trunks
initial values
4 0 1.5 Mb/s DTI/PRI Digital TOLL office
trunks initial values
4 0 Non-transmission compensated (Analog
TIE) initial values
4 0 Transmission compensated (Analog
TIE) initial values
4 0 Pad value while DTR is connected
4 0 Via net loss (Analog TIE) initial values
4 0 Satellite Analog TIE trunks initial values
4 0 Analog COT and WATS trunks initial
values
4 0 Analog Toll office trunks initial values
4 0 1.5 Mb/s DTI/PRI trunk initial values
4 0 2.0 Mb/s DTI/PRI trunk initial values
4 0 Extended peripheral equipment
universal trunk (Analog TIE) initial
values
4 0 Extended peripheral equipment
universal trunk (Analog CO) initial
values
Option 11C Mini
Page 397 of 590
Planning and Installation Guide