NT5K96MB/NT5K02MB Flexible analog line card
The NT5K02MB line card is available with message waiting, while the
NT5K96MB line card is equipped without message waiting.
Switch settings
There are no option switches on this card. Configure all settings in software.
Procedure 33
NT5K96MB / NT5K02MB Flexible analog line card installation
1
Insert the card in its allocated card slot.
2
Connect the line card units to the cross-connect terminal and
telephone by tip and ring leads.
3
Configure the telephone lines in software (LD 10).
—————————— End of Procedure ——————————
Self-test
The faceplates of the NT5K96MB and NT5K02MB cards have a red LED.
The LED lights when all of the assigned units on the circuit card are disabled.
Chapter 12 — Installing the circuit cards
Option 11C Mini
Page 171 of 590
Planning and Installation Guide