Chapter 2 — Identifying the Option 11C Mini equipment
Miscellaneous items for installation
The following is a list of miscellaneous items that can be used as part of
Option 11C Mini system installation. Quantities needed depend on the site
and customer requirements:
•
QUA6 Power Failure Transfer Units (PFTU) to transfer lines during a
power or system failure
•
NTBK80 grounding bar
•
modems or Data Communication Equipment (DCE) for remote access to
the system
•
on-site Data Terminating Equipment (DTE) or TTY terminal for
accessing the system
•
connecting blocks for the cross-connect terminal
•
transformers and centralized power supplies for items such as digit
displays on telephones
•
optional equipment such as music sources, RAN machines, paging
equipment, and CDR devices
•
NTAK92 Off-Premise Protection Module for connecting up to four
off-premise analog telephones
•
additional Modem Eliminator (NULL Modem without hardware
handshaking). The A0601397 converter may be required to interface the
DTE to the system.
•
industry-standard Ethernet Medium Access Unit (MAU)
Option 11C Mini
Planning and Installation Guide
Page 21 of 590