Installing The Krone Test Jack Frame For The Uk - Nortel Meridian 1 Planning And Installation Manual

Page 234 of 590

Installing the Krone Test Jack Frame for the UK

553-3021-209 Standard 1.00
Chapter 13 — Installing and connecting the cross-connect terminal
3 Attach labels on the cross-connect terminal to indicate the
terminal blocks assigned to the following:
• 25-pair cables from the chassis
• AUX wiring
• Telephones and Attendant Consoles
• Trunks
• Analog line cards
• DC5/AC15/RAN/PAG cards
• Data Access cards
• Power Failure Transfer Units
• Digital line cards
• Exchange line trunk cards
• Direct Dialing Inward trunk cards
• miscellaneous equipment
—————————— End of Procedure ——————————
The Krone Test Jack Frame provides terminating strips that hold 10 pairs of
cable. Generally, only 8 of the 10 pairs are used. As a result, one 25-pair cable
requires three terminating strips:
8 pairs/strip x 3 strips = 24 pairs
Figure 52 shows how one 25-pair cable is divided among three terminating
strips on the Krone Test Jack Frame.
July 1999