Nortel Meridian 1 Planning And Installation Manual page 82

Hide thumbs Also See for Meridian 1:

Table of Contents

Page 62 of 590

Chapter 4 — Creating an equipment layout plan and a card slot assignment plan

553-3021-209

Standard 1.00

Note 1: Install the NT6D70 SILC card in the Main Chassis (Slots 1, 2,

or 3) if it is used as a clock controller.

If you use NE-A25B cables instead of NTAK19AA and NTAK19BA

cables with the NTAK02 and NTAK03 cards, continue with caution.

NE-A25B cables are not wired out to station equipment or trunk

circuits. NE-A25B cables can only be wired out to SDI circuits.

Make sure to first allocate the cards that you must install in the Main Chassis.

Fill the remaining card slots as required.

If you plan on using the preassigned numbering plan with consecutive

numbers, make sure you assign all line cards in consecutive card slots.

See Figures 12 and 13 for the card slot assignments in the Main Chassis and

Chassis Expander.

Option 11c mini