Turning Services On And Off Using Feature Codes - Nortel Modular ICS 6.0 Manual

210 / Using System features
4. Press ≠ at Services. The display reads
Ringing Serviceˆ.
5. Press ≠. The display reads Sched:Nightˆ.
6. Press ≠ and use CHANGE to set the Service to
Manual.
Night Schedule for Ringing Service no longer follows the
schedule but can be turned on and off by using the feature code
and selecting Night Ringing. See Turning Services on and off
using feature codes on page 210.

Turning Services on and off using feature codes

The master control for services is in programming. See
Turning Services on and off on page 208. Day-to-day use of
Services is controlled using the following feature codes.
² ¡ à Ú
² £ ¡ à Ú
² ¡ à Û
² £ ¡ à Û
² ¡ à Ü
² £ ¡ à Ü
To turn a Service on:
1. Enter the appropriate feature code from a control
telephone.
2. For Restriction and Routing service you have to enter the
System Coordinator or Basic password.
Modular ICS 6.0 System Coordinator Guide
Turns on Ringing service. When used at the
direct-dial telephone, it activates the
alternate direct-dial telephone (extra-dial
telephone).
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
P0992640 03