Card Slot Assignments - Nortel Meridian 1 Planning And Installation Manual

Chapter 4 — Creating an equipment layout plan and a card slot assignment plan

Card slot assignments

Prepare a card slot assignment plan in advance. The card slot allocation plan
shows circuit card to slot assignments. See the most current Option 11C Mini
product bulletins for minimum version requirements.
Note: You must insert the NTDK97 MSC card in Slot 0 of the Main
Chassis. The MSC card does not support any optional daughterboards.
Only install the NTDK16 48-port Digital Line Card in Slot 4 of the
Main Chassis. Do not install another card in Slot 4, as system damage
will result.
You can install the following cards in slots 1, 2, and 3 of the Main Chassis:
• NTAK09
• NTAK10
• NTBK50
• NTAK79
• NTBK22
• NT6D70 (when used as a clock controller)
• NTRB21
The NTAK09 supports the following optional daughterboards,
• the NTAK20 Clock Controller
• the NTAK93 D-channel Interface
• the NTBK51 DDCH Daughterboard
The NTBK50 supports the following optional daughterboards:
• NTAK20 Clock Controller
• NTBK51 DDCH daughterboard or the NTAK93 D-channel Interface
CAUTION
Option 11C Mini Planning and Installation Guide
Page 59 of 590